Designate OpenStack Client Command Reference¶
List of released CLI commands available in OpenStack client. These commands
can be referenced by doing openstack help <command>.
Managing the DNS Service¶
dns quota list¶
List quotas
dns quota list
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
[--project-id PROJECT_ID]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
--project-id<PROJECT_ID>¶ Project ID Default: current project
This command is provided by the python-designateclient plugin.
dns quota reset¶
Reset quotas
dns quota reset
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
[--project-id PROJECT_ID]
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
--project-id<PROJECT_ID>¶ Project ID
This command is provided by the python-designateclient plugin.
dns quota set¶
Set quotas
dns quota set
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
[--project-id PROJECT_ID]
[--api-export-size <api-export-size>]
[--recordset-records <recordset-records>]
[--zone-records <zone-records>]
[--zone-recordsets <zone-recordsets>]
[--zones <zones>]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
--project-id<PROJECT_ID>¶ Project ID
-
--api-export-size<api-export-size>¶ New value for the api-export-size quota
-
--recordset-records<recordset-records>¶ New value for the recordset-records quota
-
--zone-records<zone-records>¶ New value for the zone-records quota
-
--zone-recordsets<zone-recordsets>¶ New value for the zone-recordsets quota
-
--zones<zones>¶ New value for the zones quota
This command is provided by the python-designateclient plugin.
dns service list¶
List service statuses
dns service list
[-f {csv,json,table,value,yaml}]
[-c COLUMN]
[--quote {all,minimal,none,nonnumeric}]
[--noindent]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--sort-column SORT_COLUMN]
[--sort-ascending | --sort-descending]
[--hostname HOSTNAME]
[--service_name SERVICE_NAME]
[--status STATUS]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--quote<QUOTE_MODE>¶ when to include quotes, defaults to nonnumeric
-
--noindent¶ whether to disable indenting the JSON
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--sort-columnSORT_COLUMN¶ specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated
-
--sort-ascending¶ sort the column(s) in ascending order
-
--sort-descending¶ sort the column(s) in descending order
-
--hostname<HOSTNAME>¶ Hostname
-
--service_name<SERVICE_NAME>¶ Service Name
-
--status<STATUS>¶ Status
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
This command is provided by the python-designateclient plugin.
dns service show¶
Show service status details
dns service show
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ Service Status ID
This command is provided by the python-designateclient plugin.
Pointer Records¶
ptr record list¶
List floatingip ptr records
ptr record list
[-f {csv,json,table,value,yaml}]
[-c COLUMN]
[--quote {all,minimal,none,nonnumeric}]
[--noindent]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--sort-column SORT_COLUMN]
[--sort-ascending | --sort-descending]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--quote<QUOTE_MODE>¶ when to include quotes, defaults to nonnumeric
-
--noindent¶ whether to disable indenting the JSON
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--sort-columnSORT_COLUMN¶ specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated
-
--sort-ascending¶ sort the column(s) in ascending order
-
--sort-descending¶ sort the column(s) in descending order
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
This command is provided by the python-designateclient plugin.
ptr record set¶
Set floatingip ptr record
ptr record set
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--description DESCRIPTION | --no-description]
[--ttl TTL | --no-ttl]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
floatingip_id
ptrdname
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--description<DESCRIPTION>¶ Description
-
--no-description¶
-
--ttl<TTL>¶ TTL
-
--no-ttl¶
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
floatingip_id¶ Floating IP ID in format region:floatingip_id
-
ptrdname¶ PTRD Name
This command is provided by the python-designateclient plugin.
ptr record show¶
Show floatingip ptr record details
ptr record show
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
floatingip_id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
floatingip_id¶ Floating IP ID in format region:floatingip_id
This command is provided by the python-designateclient plugin.
ptr record unset¶
Unset floatingip ptr record
ptr record unset
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
floatingip_id
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
floatingip_id¶ Floating IP ID in format region:floatingip_id
This command is provided by the python-designateclient plugin.
Record Sets¶
recordset create¶
Create new recordset
recordset create
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
--record RECORD
--type TYPE
[--ttl TTL]
[--description DESCRIPTION]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
zone_id
name
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--record<RECORD>¶ RecordSet Record, repeat if necessary
-
--type<TYPE>¶ RecordSet Type
-
--ttl<TTL>¶ Time To Live (Seconds)
-
--description<DESCRIPTION>¶ Description
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
zone_id¶ Zone ID
-
name¶ RecordSet Name
This command is provided by the python-designateclient plugin.
recordset delete¶
Delete recordset
recordset delete
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
[--edit-managed]
zone_id
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
--edit-managed¶ Edit resources marked as managed. Default: False
-
zone_id¶ Zone ID
-
id¶ RecordSet ID
This command is provided by the python-designateclient plugin.
recordset list¶
List recordsets
recordset list
[-f {csv,json,table,value,yaml}]
[-c COLUMN]
[--quote {all,minimal,none,nonnumeric}]
[--noindent]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--sort-column SORT_COLUMN]
[--sort-ascending | --sort-descending]
[--name NAME]
[--type TYPE]
[--data DATA]
[--ttl TTL]
[--description DESCRIPTION]
[--status STATUS]
[--action ACTION]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
zone_id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--quote<QUOTE_MODE>¶ when to include quotes, defaults to nonnumeric
-
--noindent¶ whether to disable indenting the JSON
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--sort-columnSORT_COLUMN¶ specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated
-
--sort-ascending¶ sort the column(s) in ascending order
-
--sort-descending¶ sort the column(s) in descending order
-
--name<NAME>¶ RecordSet Name
-
--type<TYPE>¶ RecordSet Type
-
--data<DATA>¶ RecordSet Record Data
-
--ttl<TTL>¶ Time To Live (Seconds)
-
--description<DESCRIPTION>¶ Description
-
--status<STATUS>¶ RecordSet Status
-
--action<ACTION>¶ RecordSet Action
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
zone_id¶ Zone ID. To list all recordsets specify ‘all’
This command is provided by the python-designateclient plugin.
recordset set¶
Set recordset properties
recordset set
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--record RECORD]
[--description DESCRIPTION | --no-description]
[--ttl TTL | --no-ttl]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
[--edit-managed]
zone_id
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--record<RECORD>¶ RecordSet Record, repeat if necessary
-
--description<DESCRIPTION>¶ Description
-
--no-description¶
-
--ttl<TTL>¶ TTL
-
--no-ttl¶
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
--edit-managed¶ Edit resources marked as managed. Default: False
-
zone_id¶ Zone ID
-
id¶ RecordSet ID
This command is provided by the python-designateclient plugin.
recordset show¶
Show recordset details
recordset show
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
zone_id
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
zone_id¶ Zone ID
-
id¶ RecordSet ID
This command is provided by the python-designateclient plugin.
Top Level Domains¶
tld create¶
Create new tld
tld create
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
--name NAME
[--description DESCRIPTION]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--name<NAME>¶ TLD Name
-
--description<DESCRIPTION>¶ Description
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
This command is provided by the python-designateclient plugin.
tld delete¶
Delete tld
tld delete [--all-projects] [--sudo-project-id SUDO_PROJECT_ID] id
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ TLD name or ID
This command is provided by the python-designateclient plugin.
tld list¶
List tlds
tld list
[-f {csv,json,table,value,yaml}]
[-c COLUMN]
[--quote {all,minimal,none,nonnumeric}]
[--noindent]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--sort-column SORT_COLUMN]
[--sort-ascending | --sort-descending]
[--name NAME]
[--description DESCRIPTION]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--quote<QUOTE_MODE>¶ when to include quotes, defaults to nonnumeric
-
--noindent¶ whether to disable indenting the JSON
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--sort-columnSORT_COLUMN¶ specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated
-
--sort-ascending¶ sort the column(s) in ascending order
-
--sort-descending¶ sort the column(s) in descending order
-
--name<NAME>¶ TLD NAME
-
--description<DESCRIPTION>¶ TLD Description
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
This command is provided by the python-designateclient plugin.
tld set¶
Set tld properties
tld set
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--name NAME]
[--description DESCRIPTION | --no-description]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--name<NAME>¶ TLD Name
-
--description<DESCRIPTION>¶ Description
-
--no-description¶
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ TLD name or ID
This command is provided by the python-designateclient plugin.
tld show¶
Show tld details
tld show
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ TLD name or ID
This command is provided by the python-designateclient plugin.
Transaction Signature Keys¶
tsigkey create¶
Create new tsigkey
tsigkey create
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
--name NAME
--algorithm ALGORITHM
--secret SECRET
--scope SCOPE
--resource-id RESOURCE_ID
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--name<NAME>¶ TSIGKey Name
-
--algorithm<ALGORITHM>¶ TSIGKey algorithm
-
--secret<SECRET>¶ TSIGKey secret
-
--scope<SCOPE>¶ TSIGKey scope
-
--resource-id<RESOURCE_ID>¶ TSIGKey resource_id
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
This command is provided by the python-designateclient plugin.
tsigkey delete¶
Delete tsigkey
tsigkey delete [--all-projects] [--sudo-project-id SUDO_PROJECT_ID] id
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ TSIGKey ID
This command is provided by the python-designateclient plugin.
tsigkey list¶
List tsigkeys
tsigkey list
[-f {csv,json,table,value,yaml}]
[-c COLUMN]
[--quote {all,minimal,none,nonnumeric}]
[--noindent]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--sort-column SORT_COLUMN]
[--sort-ascending | --sort-descending]
[--name NAME]
[--algorithm ALGORITHM]
[--scope SCOPE]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--quote<QUOTE_MODE>¶ when to include quotes, defaults to nonnumeric
-
--noindent¶ whether to disable indenting the JSON
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--sort-columnSORT_COLUMN¶ specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated
-
--sort-ascending¶ sort the column(s) in ascending order
-
--sort-descending¶ sort the column(s) in descending order
-
--name<NAME>¶ TSIGKey NAME
-
--algorithm<ALGORITHM>¶ TSIGKey algorithm
-
--scope<SCOPE>¶ TSIGKey scope
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
This command is provided by the python-designateclient plugin.
tsigkey set¶
Set tsigkey properties
tsigkey set
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--name NAME]
[--algorithm ALGORITHM]
[--secret SECRET]
[--scope SCOPE]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--name<NAME>¶ TSIGKey Name
-
--algorithm<ALGORITHM>¶ TSIGKey algorithm
-
--secret<SECRET>¶ TSIGKey secret
-
--scope<SCOPE>¶ TSIGKey scope
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ TSIGKey ID
This command is provided by the python-designateclient plugin.
tsigkey show¶
Show tsigkey details
tsigkey show
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ TSIGKey ID
This command is provided by the python-designateclient plugin.
Managing Zones¶
zone abandon¶
Abandon a zone
zone abandon [--all-projects] [--sudo-project-id SUDO_PROJECT_ID] id
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ Zone ID
This command is provided by the python-designateclient plugin.
zone axfr¶
AXFR a zone
zone axfr [--all-projects] [--sudo-project-id SUDO_PROJECT_ID] id
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ Zone ID
This command is provided by the python-designateclient plugin.
zone blacklist create¶
Create new blacklist
zone blacklist create
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
--pattern PATTERN
[--description DESCRIPTION]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--pattern<PATTERN>¶ Blacklist pattern
-
--description<DESCRIPTION>¶ Description
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
This command is provided by the python-designateclient plugin.
zone blacklist delete¶
Delete blacklist
zone blacklist delete
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
id
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ Blacklist ID
This command is provided by the python-designateclient plugin.
zone blacklist list¶
List blacklists
zone blacklist list
[-f {csv,json,table,value,yaml}]
[-c COLUMN]
[--quote {all,minimal,none,nonnumeric}]
[--noindent]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--sort-column SORT_COLUMN]
[--sort-ascending | --sort-descending]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--quote<QUOTE_MODE>¶ when to include quotes, defaults to nonnumeric
-
--noindent¶ whether to disable indenting the JSON
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--sort-columnSORT_COLUMN¶ specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated
-
--sort-ascending¶ sort the column(s) in ascending order
-
--sort-descending¶ sort the column(s) in descending order
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
This command is provided by the python-designateclient plugin.
zone blacklist set¶
Set blacklist properties
zone blacklist set
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--pattern PATTERN]
[--description DESCRIPTION | --no-description]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--pattern<PATTERN>¶ Blacklist pattern
-
--description<DESCRIPTION>¶ Description
-
--no-description¶
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ Blacklist ID
This command is provided by the python-designateclient plugin.
zone blacklist show¶
Show blacklist details
zone blacklist show
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ Blacklist ID
This command is provided by the python-designateclient plugin.
zone create¶
Create new zone
zone create
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--email EMAIL]
[--type {PRIMARY,SECONDARY}]
[--ttl TTL]
[--description DESCRIPTION]
[--masters MASTERS [MASTERS ...]]
[--attributes ATTRIBUTES [ATTRIBUTES ...]]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
name
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--email<EMAIL>¶ Zone Email
-
--type<TYPE>¶ Zone Type
-
--ttl<TTL>¶ Time To Live (Seconds)
-
--description<DESCRIPTION>¶ Description
-
--masters<MASTERS>¶ Zone Masters
-
--attributes<ATTRIBUTES>¶ Zone Attributes
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
name¶ Zone Name
This command is provided by the python-designateclient plugin.
zone delete¶
Delete zone
zone delete
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ Zone ID
This command is provided by the python-designateclient plugin.
zone export create¶
Export a Zone
zone export create
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
zone_id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
zone_id¶ Zone ID
This command is provided by the python-designateclient plugin.
zone export delete¶
Delete a Zone Export
zone export delete
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
zone_export_id
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
zone_export_id¶ Zone Export ID
This command is provided by the python-designateclient plugin.
zone export list¶
List Zone Exports
zone export list
[-f {csv,json,table,value,yaml}]
[-c COLUMN]
[--quote {all,minimal,none,nonnumeric}]
[--noindent]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--sort-column SORT_COLUMN]
[--sort-ascending | --sort-descending]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--quote<QUOTE_MODE>¶ when to include quotes, defaults to nonnumeric
-
--noindent¶ whether to disable indenting the JSON
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--sort-columnSORT_COLUMN¶ specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated
-
--sort-ascending¶ sort the column(s) in ascending order
-
--sort-descending¶ sort the column(s) in descending order
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
This command is provided by the python-designateclient plugin.
zone export show¶
Show a Zone Export
zone export show
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
zone_export_id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
zone_export_id¶ Zone Export ID
This command is provided by the python-designateclient plugin.
zone export showfile¶
Show the zone file for the Zone Export
zone export showfile
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
zone_export_id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
zone_export_id¶ Zone Export ID
This command is provided by the python-designateclient plugin.
zone import create¶
Import a Zone from a file on the filesystem
zone import create
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
zone_file_path
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
zone_file_path¶ Path to a zone file
This command is provided by the python-designateclient plugin.
zone import delete¶
Delete a Zone Import
zone import delete
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
zone_import_id
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
zone_import_id¶ Zone Import ID
This command is provided by the python-designateclient plugin.
zone import list¶
List Zone Imports
zone import list
[-f {csv,json,table,value,yaml}]
[-c COLUMN]
[--quote {all,minimal,none,nonnumeric}]
[--noindent]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--sort-column SORT_COLUMN]
[--sort-ascending | --sort-descending]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--quote<QUOTE_MODE>¶ when to include quotes, defaults to nonnumeric
-
--noindent¶ whether to disable indenting the JSON
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--sort-columnSORT_COLUMN¶ specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated
-
--sort-ascending¶ sort the column(s) in ascending order
-
--sort-descending¶ sort the column(s) in descending order
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
This command is provided by the python-designateclient plugin.
zone import show¶
Show a Zone Import
zone import show
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
zone_import_id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
zone_import_id¶ Zone Import ID
This command is provided by the python-designateclient plugin.
zone list¶
List zones
zone list
[-f {csv,json,table,value,yaml}]
[-c COLUMN]
[--quote {all,minimal,none,nonnumeric}]
[--noindent]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--sort-column SORT_COLUMN]
[--sort-ascending | --sort-descending]
[--name NAME]
[--email EMAIL]
[--type {PRIMARY,SECONDARY}]
[--ttl TTL]
[--description DESCRIPTION]
[--status STATUS]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--quote<QUOTE_MODE>¶ when to include quotes, defaults to nonnumeric
-
--noindent¶ whether to disable indenting the JSON
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--sort-columnSORT_COLUMN¶ specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated
-
--sort-ascending¶ sort the column(s) in ascending order
-
--sort-descending¶ sort the column(s) in descending order
-
--name<NAME>¶ Zone Name
-
--email<EMAIL>¶ Zone Email
-
--type<TYPE>¶ Zone Type
-
--ttl<TTL>¶ Time To Live (Seconds)
-
--description<DESCRIPTION>¶ Description
-
--status<STATUS>¶ Zone Status
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
This command is provided by the python-designateclient plugin.
zone set¶
Set zone properties
zone set
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--email EMAIL]
[--ttl TTL]
[--description DESCRIPTION | --no-description]
[--masters MASTERS [MASTERS ...]]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--email<EMAIL>¶ Zone Email
-
--ttl<TTL>¶ Time To Live (Seconds)
-
--description<DESCRIPTION>¶ Description
-
--no-description¶
-
--masters<MASTERS>¶ Zone Masters
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ Zone ID
This command is provided by the python-designateclient plugin.
zone show¶
Show zone details
zone show
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ Zone ID
This command is provided by the python-designateclient plugin.
zone transfer accept list¶
List Zone Transfer Accepts
zone transfer accept list
[-f {csv,json,table,value,yaml}]
[-c COLUMN]
[--quote {all,minimal,none,nonnumeric}]
[--noindent]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--sort-column SORT_COLUMN]
[--sort-ascending | --sort-descending]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--quote<QUOTE_MODE>¶ when to include quotes, defaults to nonnumeric
-
--noindent¶ whether to disable indenting the JSON
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--sort-columnSORT_COLUMN¶ specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated
-
--sort-ascending¶ sort the column(s) in ascending order
-
--sort-descending¶ sort the column(s) in descending order
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
This command is provided by the python-designateclient plugin.
zone transfer accept request¶
Accept a Zone Transfer Request
zone transfer accept request
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
--transfer-id TRANSFER_ID
--key KEY
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--transfer-id<TRANSFER_ID>¶ Transfer ID
-
--key<KEY>¶ Transfer Key
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
This command is provided by the python-designateclient plugin.
zone transfer accept show¶
Show Zone Transfer Accept
zone transfer accept show
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ Zone Tranfer Accept ID
This command is provided by the python-designateclient plugin.
zone transfer request create¶
Create new zone transfer request
zone transfer request create
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--target-project-id TARGET_PROJECT_ID]
[--description DESCRIPTION]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
zone_id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--target-project-id<TARGET_PROJECT_ID>¶ Target Project ID to transfer to.
-
--description<DESCRIPTION>¶ Description
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
zone_id¶ Zone ID to transfer.
This command is provided by the python-designateclient plugin.
zone transfer request delete¶
Delete a Zone Transfer Request
zone transfer request delete
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
id
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ Zone Transfer Request ID
This command is provided by the python-designateclient plugin.
zone transfer request list¶
List Zone Transfer Requests
zone transfer request list
[-f {csv,json,table,value,yaml}]
[-c COLUMN]
[--quote {all,minimal,none,nonnumeric}]
[--noindent]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--sort-column SORT_COLUMN]
[--sort-ascending | --sort-descending]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--quote<QUOTE_MODE>¶ when to include quotes, defaults to nonnumeric
-
--noindent¶ whether to disable indenting the JSON
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--sort-columnSORT_COLUMN¶ specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated
-
--sort-ascending¶ sort the column(s) in ascending order
-
--sort-descending¶ sort the column(s) in descending order
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
This command is provided by the python-designateclient plugin.
zone transfer request set¶
Set a Zone Transfer Request
zone transfer request set
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--description DESCRIPTION | --no-description]
[--target-project-id TARGET_PROJECT_ID]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--description<DESCRIPTION>¶ Description
-
--no-description¶
-
--target-project-id<TARGET_PROJECT_ID>¶ Target Project ID to transfer to.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ Zone Transfer Request ID
This command is provided by the python-designateclient plugin.
zone transfer request show¶
Show Zone Transfer Request Details
zone transfer request show
[-f {json,shell,table,value,yaml}]
[-c COLUMN]
[--noindent]
[--prefix PREFIX]
[--max-width <integer>]
[--fit-width]
[--print-empty]
[--all-projects]
[--sudo-project-id SUDO_PROJECT_ID]
id
-
-f<FORMATTER>,--format<FORMATTER>¶ the output format, defaults to table
-
-cCOLUMN,--columnCOLUMN¶ specify the column(s) to include, can be repeated to show multiple columns
-
--noindent¶ whether to disable indenting the JSON
-
--prefix<PREFIX>¶ add a prefix to all variable names
-
--max-width<integer>¶ Maximum display width, <1 to disable. You can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.
-
--fit-width¶ Fit the table to the display width. Implied if –max-width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable
-
--print-empty¶ Print empty table if there is no data to show.
-
--all-projects¶ Show results from all projects. Default: False
-
--sudo-project-id<SUDO_PROJECT_ID>¶ Project ID to impersonate for this command. Default: None
-
id¶ Zone Tranfer Request ID
This command is provided by the python-designateclient plugin.
Except where otherwise noted, this document is licensed under Creative Commons Attribution 3.0 License. See all OpenStack Legal Documents.