Package: telnet
Priority: standard
Section: net
Installed-Size: 184
Maintainer: Herbert Xu <herbert@debian.org>
Architecture: sparc
Source: netkit-telnet
Version: 0.16-4potato.1
Replaces: netstd
Depends: libc6 (>= 2.1.2), libncurses5
Size: 61584
Description: The telnet client.
 The telnet command is used for interactive communication with another host
 using the TELNET protocol.

Package: libwrap0
Priority: standard
Section: base
Installed-Size: 136
Maintainer: Anthony Towns <ajt@debian.org>
Architecture: sparc
Source: tcp-wrappers
Version: 7.6-4
Depends: libc6 (>= 2.1.2)
Recommends: tcpd
Conflicts: netbase (<< 3.16-1)
Size: 53244
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests. Security options are:
 access control per host, domain and/or service; detection of
 host name spoofing or host address spoofing; booby traps to
 implement an early-warning system.

Package: pciutils
Priority: standard
Section: admin
Installed-Size: 252
Maintainer: Remco van de Meent <remco@debian.org>
Architecture: sparc
Version: 1:2.1.2-2
Depends: libc6 (>= 2.1.2)
Size: 75876
Description: Linux PCI Utilities (for 2.[123].x kernels)
 This package contains various utilities for inspecting and setting of
 devices connected to the PCI bus. Requires kernel version 2.1.82 or newer
 (supporting the /proc/bus/pci interface).

Package: ncurses-base
Essential: yes
Priority: required
Section: base
Installed-Size: 304
Maintainer: Joel Klecker <ncurses-maint@debian.org>
Architecture: all
Source: ncurses
Version: 5.0-6.0potato1
Replaces: ncurses-term
Provides: ncurses-runtime
Conflicts: ncurses, ncurses-runtime
Size: 80756
Description: Descriptions of common terminal types
 This package contains what should be a reasonable subset of terminal
 definitions, including: ansi, dumb, linux, rxvt, screen, sun, vt100,
 vt102, vt220, vt52, and xterm.

Package: procps
Priority: required
Section: base
Installed-Size: 540
Maintainer: Craig Small <csmall@debian.org>
Architecture: sparc
Version: 1:2.0.6-5
Replaces: bsdutils
Provides: watch
Depends: libc6 (>= 2.1.2), libncurses5
Recommends: psmisc
Conflicts: watch, libproc-dev (<< 1:1.2.6-2), w-bassman (<< 1.0-3), procps-nonfree
Size: 156100
Description: The /proc file system utilities.
 These are utilities to browse the /proc filesystem, which is not a real file
 system but a way for the kernel to provide information about the status of
 entries in its process table. (e.g. running, stopped or "zombie")
 Both command line and full screen utilities are provided. Ncurses is needed
 for the full screen utilities.

Package: console-tools-libs
Priority: required
Section: libs
Installed-Size: 424
Maintainer: Yann Dirson <dirson@debian.org>
Architecture: sparc
Source: console-tools
Version: 1:0.2.3-10.3
Depends: libc6 (>= 2.1.2)
Size: 117652
Description: Shared libraries for Linux console and font manipulation.
 This package includes the libconsole and libcfont libraries, which
 are indented to provide a high-level programming interface to the
 Linux console, and console-font files.

Package: adduser
Priority: required
Section: base
Installed-Size: 61
Maintainer: Guy Maor <maor@debian.org>
Architecture: all
Version: 3.11.1
Depends: passwd (>= 961025)
Size: 17274
Description: Add users and groups to the system.
 Adduser can create new users and groups and add existing users to
 existing groups.
 .
 Adding users with adduser is much easier than adding them by hand.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, allow you to set an
 initial password and gecos, and optionally run a custom script.

Package: fbset
Priority: important
Section: admin
Installed-Size: 204
Maintainer: Hartmut Koptein <koptein@debian.org>
Architecture: sparc
Version: 2.1-6
Depends: libc6 (>= 2.1.2), makedev (>= 2.3.1-10)
Size: 60952
Description: Framebuffer device maintenance program.
 Program to modify settings for the framebuffer devices (/dev/fb?)
 on Linux, like depth, virtual resolution, timing parameters etc.
 .
 This program is useful for all Linux/m68k kernel versions, and
 for late 2.1 kernels on most other architectures.

Package: textutils
Essential: yes
Priority: required
Section: base
Installed-Size: 1509
Maintainer: Galen Hazelwood <galenh@debian.org>
Architecture: sparc
Version: 2.0-2
Replaces: bsdmainutils (<= 4.5.2), ptx
Provides: ptx
Pre-Depends: libc6 (>= 2.0.105)
Conflicts: ptx
Size: 536244
Description: The GNU text file processing utilities.
 The utilities: cat cksum comm csplit cut expand fmt fold head join
 nl od paste pr ptx sort split sum tac tail tr tsort unexpand uniq wc.

Package: perl-5.005-base
Installed-Size: 1496
Maintainer: Darren Stalder <torin@daft.com>
Architecture: sparc
Source: perl-5.005
Version: 5.005.03-7.1
Replaces: perl-base, perl-5.005
Provides: perl5-base
Pre-Depends: libc6 (>= 2.1.2), libdb2 (>= 1:2.4.14-7), libgdbmg1
Suggests: perl-5.005
Conflicts: perl-base (<< 5.004.05), perl
Size: 509480
Description: The Pathologically Eclectic Rubbish Lister
 A scripting language with delusions of full language-hood, Perl is used
 in many system scripts and utilities.
 .
 This is a stripped down Perl with only essential libraries.  To make
 full use of Perl, you'll want to install the perl-5.005 package
 which supplements this one.

Package: ppp
Priority: standard
Section: net
Installed-Size: 764
Maintainer: Philip Hands <phil@hands.com>
Architecture: sparc
Version: 2.3.11-1.4
Replaces: ppp-pam
Depends: libc6 (>= 2.1.2), libpam0g, libpam-modules, netbase, sysvinit (>= 2.75-4)
Suggests: debconf
Conflicts: ppp-pam
Size: 248364
Description: Point-to-Point Protocol (PPP) daemon.
 The Point-to-Point Protocol (PPP) provides a standard way to transmit
 datagrams over a serial link, as well as a standard way for the machines
 at either end of the link (the "peers") to negotiate various optional
 characteristics of the link.  Using PPP, a serial link can be used to
 transmit Internet Protocol (IP) datagrams, allowing TCP/IP connections
 between the peers.
 .
 This package contains pppd with PAM support built-in, so `ppp-pam'
 package is obsolete.

Package: bsdutils
Essential: yes
Priority: required
Section: base
Installed-Size: 140
Maintainer: Vincent Renardias <vincent@debian.org>
Architecture: sparc
Source: util-linux (2.10f-5.1)
Version: 1:2.10f-5.1
Pre-Depends: libc6 (>= 2.1.2)
Recommends: bsdmainutils
Size: 33948
Description: Basic utilities from 4.4BSD-Lite.
 This package contains the bare minimum number of BSD utilities needed
 to boot a Debian system.  You should probably also install
 bsdmainutils to get the remaining standard BSD utilities.
 .
 Included are: kill, logger, renice, script, wall

Package: eject
Installed-Size: 38
Maintainer: Martin Mitchell <martin@debian.org>
Architecture: sparc
Version: 2.0.2-1
Depends: libc6 (>= 2.0.99)
Size: 17298
Description: ejects CDs and operates CD-Changers under Linux
 This little program will eject CD-ROMs (assuming your drive supports
 the CDROMEJECT ioctl). It also allows setting the autoeject feature,
 currently supported by a number of the Linux CD-ROM drivers. See the
 documentation in /usr/src/linux/Documentation for more information on
 the autoeject feature.
 .
 On supported ATAPI/IDE multi-disc CD-ROM changers, it allows changing
 the active disc

Package: sed
Essential: yes
Installed-Size: 216
Maintainer: Wichert Akkerman <wakkerma@debian.org>
Architecture: sparc
Version: 3.02-5
Pre-Depends: libc6 (>= 2.1.2)
Size: 68676
Description: The GNU sed stream editor.
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.

Package: passwd
Priority: required
Section: base
Installed-Size: 1016
Maintainer: Ben Collins <bcollins@debian.org>
Architecture: sparc
Source: shadow
Version: 19990827-20
Replaces: manpages (<= 1.15-2)
Depends: libc6 (>= 2.1.2), libpam0g, login (>= 970502-1), libpam-modules (>= 0.72-5)
Conflicts: shadow-passwd, pam-apps
Size: 307574
Description: Change and administer password and group data.
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian

Package: base-passwd
Essential: yes
Installed-Size: 96
Maintainer: Wichert Akkerman <wakkerma@debian.org>
Architecture: sparc
Version: 3.1.10
Replaces: base
Depends: libc6 (>= 2.1.2)
Size: 17788
Description: Debian Base System Password/Group Files
 This package provides the master /etc/passwd and /etc/group files,
 containing Debian-allocated user and group IDs, plus the update-passwd
 utility to keep them up to date.

Package: apt
Priority: standard
Section: admin
Installed-Size: 1640
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: sparc
Version: 0.3.19
Replaces: deity, libapt-pkg-doc (<< 0.3.7), libapt-pkg-dev (<< 0.3.7)
Provides: libapt-pkg2.7
Depends: libc6 (>= 2.1.2), libstdc++2.10
Suggests: dpkg-dev
Conflicts: deity
Size: 467566
Description: Advanced front-end for dpkg
 This is Debian's next generation front-end for the dpkg package manager.
 It provides the apt-get utility and APT dselect method that provides a
 simpler, safer way to install and upgrade packages.
 .
 APT features complete installation ordering, multiple source capability
 and several other unique features, see the Users Guide in
 /usr/doc/apt/guide.text.gz

Package: base-config
Priority: optional
Section: admin
Installed-Size: 316
Maintainer: Joey Hess <joeyh@debian.org>
Architecture: sparc
Version: 0.33.2
Replaces: debconf (<< 0.2.79), debconf-tiny (<< 0.2.79)
Depends: debconf, apt
Suggests: tasksel
Conflicts: debconf (<< 0.2.79), debconf-tiny (<< 0.2.79), tasksel (<< 1.0-7)
Size: 76202
Description: Debian base configuration package
 This package handles setting up the Debian base system. It contains the
 questions you see when you install Debian for the first time and boot up
 your new Debian system.
 .
 It can be removed with no ill effects -- now that your Debian system is
 installed, this package's only useful function is to allow you to
 reconfigure some of the things it asked you about earlier.

Package: debconf-tiny
Priority: optional
Section: admin
Installed-Size: 108
Maintainer: Joey Hess <joeyh@debian.org>
Architecture: all
Source: debconf
Version: 0.2.80.17
Provides: debconf
Depends: perl-5.005-base (>= 5.005.03-4.1)
Suggests: whiptail
Conflicts: debconf, menu (<= 2.1.3-1), gnome-utils (<< 1.0.13-2), dialog (<< 0.9a-17), whiptail (<< 0.50-1)
Size: 21210
Description: Tiny subset of debconf for the base system
 Debconf is a configuration management system for debian packages. It is
 used by some packages to prompt you for questions before they are installed.
 .
 This is a tiny subset of debconf, with only one frontend, few features. It is
 intended to be used to set up things in the base system that use debconf.
 Unless you are very short on disk space, you should install debconf instead.

Package: update
Essential: yes
Installed-Size: 22
Maintainer: Guy Maor <maor@debian.org>
Architecture: sparc
Version: 2.11-1
Replaces: bdflush, miscutils
Pre-Depends: libc6 (>= 2.0.105)
Conflicts: bdflush
Size: 8048
Description: daemon to periodically flush filesystem buffers.
 The update daemon flushes the filesystem buffers at regular intervals.
 This version does not spawn a bdflush daemon, as this is now done by
 the kernel (kflushd).  It will exit silently on newer kernels that do
 not need its services.

Package: util-linux
Essential: yes
Priority: required
Section: base
Installed-Size: 1364
Maintainer: Vincent Renardias <vincent@debian.org>
Architecture: sparc
Version: 2.10f-5.1
Replaces: miscutils, setterm, getty, fdisk
Pre-Depends: libc6 (>= 2.1.2), libncurses5
Conflicts: setterm, getty, fdisk
Size: 441044
Description: Miscellaneous system utilities.
 A mixed bag of system utilities: arch chkdupexe cfdisk cytune dmesg
 fdisk fsck.minix getty getopt hwclock ipcrm ipcs kbdrate mcookie
 mkfs mkfs.minix mkswap more namei rdev setterm setsid tunelp whereis.

Package: libpam-modules
Priority: required
Section: base
Installed-Size: 488
Maintainer: Ben Collins <bcollins@debian.org>
Architecture: sparc
Source: pam
Version: 0.72-9
Replaces: libpam0g-util
Provides: libpam-motd, libpam-mkhomedir
Depends: libc6 (>= 2.1.2), libdb2 (>= 1:2.4.14-7), libpam0g (>= 0.72-1)
Conflicts: libpam0g-modules (= 0.66-1), libpam-motd, libpam-mkhomedir
Size: 140426
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
 the pam_unix_*.so module as well as some specialty modules.

Package: libc6
Priority: required
Section: base
Installed-Size: 10220
Maintainer: Ben Collins <bcollins@debian.org>
Architecture: sparc
Source: glibc
Version: 2.1.3-13
Replaces: timezones, libc6-dev (<< 2.0.110-1), libc6-bin, locales (<< 2.1.3-5), gconv-modules
Provides: gconv-modules
Depends: ldso (>= 1.9.11-5)
Recommends: locales
Suggests: glibc-doc
Conflicts: libc5 (<< 5.3.12-2), libpthread0 (<< 0.7-10), libwcsmbs, libc6-doc, timezones, libc6-bin, gconv-modules
Size: 2074094
Description: GNU C Library: Shared libraries and Timezone data
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
 Timezone data is also included.

Package: makedev
Priority: required
Section: base
Installed-Size: 72
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: all
Version: 2.3.1-46.2
Depends: base-passwd (>= 3.0.4)
Size: 25730
Description: Creates special device files in /dev.
 The MAKEDEV executable is used to populate the /dev directory with device
 files.

Package: ncurses-bin
Essential: yes
Priority: required
Section: base
Installed-Size: 548
Maintainer: Joel Klecker <ncurses-maint@debian.org>
Architecture: sparc
Source: ncurses
Version: 5.0-6.0potato1
Provides: tput
Depends: libc6 (>= 2.1.2), libncurses5
Conflicts: ncurses, tput
Size: 277516
Description: Terminal-related programs and man pages
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.

Package: ftp
Priority: standard
Section: net
Installed-Size: 168
Maintainer: Herbert Xu <herbert@debian.org>
Architecture: sparc
Source: netkit-ftp
Version: 0.10-3.1
Replaces: netstd
Depends: libc6 (>= 2.1.2), libncurses5, libreadline4 (>= 4.1)
Size: 44130
Description: The FTP client.
 ftp is the user interface to the ARPANET standard File Transfer Protocol.
 The program allows a user to transfer files to and from a remote network
 site.

Package: tar
Essential: yes
Priority: required
Section: base
Installed-Size: 1008
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: sparc
Version: 1.13.17-2
Pre-Depends: libc6 (>= 2.1.2)
Size: 403890
Description: GNU tar
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like pkzip in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: ldso
Essential: yes
Installed-Size: 684
Maintainer: David Engel <david@debian.org>
Architecture: sparc
Source: ld.so
Version: 1.9.11-9
Replaces: ldconfig, libc6
Provides: ldconfig, libdl1
Conflicts: ldconfig
Size: 270920
Description: The Linux dynamic linker, library and utilities.
 The dynamic linker provides the user-level support for loading and
 linking DLL and ELF shared libraries.  It is required by any program
 that uses shared libraries.
 .
 WARNING: Do NOT downgrade this package to version 1.8.x or earlier.
 Doing so may leave your system in an unusable state.

Package: modconf
Installed-Size: 616
Maintainer: Boot Floppies team <debian-boot@lists.debian.org>
Architecture: all
Version: 0.2.26.14
Depends: whiptail, modutils (>= 2.1.85-14)
Size: 168868
Description: Device Driver Configuration
 Modconf provides a GUI for installing and configuring device driver modules.

Package: pppconfig
Priority: optional
Section: base
Installed-Size: 90
Maintainer: John Hasler <jhasler@debian.org>
Architecture: all
Version: 2.0.5
Depends: ppp (>= 2.3.7), whiptail | dialog
Size: 24264
Description: A text menu based utility for configuring ppp.
 It provides extensive explanations at each step.  pppconfig supports
 PAP, CHAP, and chat methods of authentication.  It uses the standard
 ppp configuration files and sets ppp up so that the standard pon and
 poff commands can be used to control ppp.
 Some features supported by pppconfig are:
  - Multiple ISP's with separate nameservers.
  - Modem detection.
  - Dynamic DNS.
  - Dial on demand.

Package: pump
Priority: optional
Section: net
Installed-Size: 75
Maintainer: Steve Dunham <dunham@debian.org>
Architecture: sparc
Version: 0.7.3-2
Depends: libc6 (>= 2.0.105), libpopt0
Conflicts: dhcpcd, dhcpcd-sv
Size: 25438
Description: Simple DHCP/BOOTP client for 2.2.x kernels
 This is the DHCP/BOOTP client written by RedHat.  This replaces the dhcpcd
 package.

Package: gettext-base
Priority: standard
Section: base
Installed-Size: 448
Maintainer: Santiago Vila <sanvila@ctv.es>
Architecture: sparc
Source: gettext
Version: 0.10.35-13
Replaces: gettext (<= 0.10.35-8)
Depends: libc6 (>= 2.1.2)
Size: 81620
Description: GNU Internationalization utilities for the base system
 This package includes the gettext program which allow other packages
 to internationalize the messages given by shell scripts.

Package: gzip
Essential: yes
Priority: required
Section: base
Installed-Size: 134
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: sparc
Version: 1.2.4-33
Depends: debianutils (>= 1.6)
Pre-Depends: libc6 (>= 2.0.105)
Size: 71096
Description: The GNU compression utility.
 This is the standard GNU file compression utility, which is also the default
 compression tool for Debian.  It typically operates on files with names
 ending in '.gz'.
 .
 This package can also decompress '.Z' files created with 'compress'.

Package: xviddetect
Priority: optional
Section: x11
Installed-Size: 176
Maintainer: Randolph Chung <tausq@debian.org>
Architecture: all
Version: 0.3-2.1
Depends: perl5-base, apt, whiptail
Size: 58064
Description: XFree86 installation helper
 A simple script that will detect which X server to install, by
 running a non-invasive PCI scan of your system and matching against a
 database of known cards
 .
 This package also includes a tool, anXious, which helps you set up a
 configuration file for XFree86 (/etc/X11/XF86Config)

Package: console-tools
Priority: required
Section: utils
Installed-Size: 948
Maintainer: Yann Dirson <dirson@debian.org>
Architecture: sparc
Version: 1:0.2.3-10.3
Replaces: open
Provides: console-utilities, open
Depends: console-tools-libs (= 1:0.2.3-10.3), libc6 (>= 2.1.2), sysvinit (>> 2.74), console-data (>> 1999.08.29-3)
Suggests: kbd-compat
Conflicts: console-utilities, kbd (<< 0.95-11), open
Size: 285188
Description: Linux console and font utilities.
 This package allows you to set-up and manipulate the Linux console (ie.
 screen and keyboard), and manipulate console-font files.
 .
 `console-tools' was developed from version 0.94 of the standard `kbd'
 package, and integrates many fixes and enhancements, including new
 kbd features up to 0.96a.
 .
 You will probably want to install a set of data files, such as the one
 in the `console-tools-data' package.
 .
 For command-line compatibility with kbd, you may want to install the
 kbd-compat package.

Package: sparc-utils
Priority: extra
Section: misc
Installed-Size: 408
Maintainer: Eric Delaunay <delaunay@lix.polytechnique.fr>
Architecture: sparc
Version: 1.5-1
Pre-Depends: libc6 (>= 2.1.2)
Size: 154510
Description: Miscellaneous tools useful for sparc systems.
 This package provides the following tools:
 .
 - elftoaout,
   piggyback, tilo   to build bootable kernel images over the net for Sparc
		     workstations.  They are mainly used by the boot-floppies
		     package to create the tftpboot image of the Debian
		     installation subsystem.
 - prtconf, eeprom   to dump and modify contents of OpenPROM.
 - sparc32, sparc64  to set linux personality for one program and its children
                     (useful to enforce a 32 bit environment on 64 bit system).
 - ethtool           to display or change ethernet card setting (for use with
                     Happy Meal ethernet cards).

Package: libpam0g
Priority: required
Section: base
Installed-Size: 148
Maintainer: Ben Collins <bcollins@debian.org>
Architecture: sparc
Source: pam
Version: 0.72-9
Replaces: libpam0g-util
Depends: libc6 (>= 2.1.2), libpam-runtime
Suggests: libpam-doc
Conflicts: libpam0 (<= 0.56-2), libpam
Size: 58798
Description: Pluggable Authentication Modules library
 Contains the C shared library for Linux-PAM, a suite of shared
 libraries that enable the local system administrator to choose how
 applications authenticate users.  In other words, without rewriting
 or recompiling a PAM-aware application, it is possible to switch
 between the authentication mechanism(s) it uses.  One may entirely
 upgrade the local authentication system without touching the
 applications themselves.

Package: dpkg
Essential: yes
Priority: required
Section: base
Installed-Size: 2148
Maintainer: Wichert Akkerman <wakkerma@debian.org>
Architecture: sparc
Version: 1.6.15.2
Replaces: dpkg-doc-ja
Pre-Depends: libc6 (>= 2.1.2), libncurses5, libstdc++2.10
Size: 736280
Description: Package maintenance system for Debian
 This package contains the programs which handle the installation and
 removal of packages on your system.
 .
 The primary interface for the dpkg suite is the `dselect' program;
 a more low-level and less user-friendly interface is available in
 the form of the `dpkg' command.
 .
 In order to unpack and build Debian source packages you will need to
 install the developers' package `dpkg-dev' as well as this one.

Package: base-files
Essential: yes
Priority: required
Section: base
Installed-Size: 364
Maintainer: Santiago Vila <sanvila@ctv.es>
Architecture: sparc
Version: 2.2.0
Replaces: base, miscutils, libreadline, libreadlineg2 (<< 2.1-16), bash (<< 2.03-3)
Provides: base
Depends: awk, base-passwd (>= 2.0.3.4)
Size: 28986
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, /etc/nsswitch.conf,
 and others, and the text of several common licenses in use on Debian systems.

Package: findutils
Essential: yes
Priority: required
Section: base
Installed-Size: 356
Maintainer: Kevin Dalley <kevind@rahul.net>
Architecture: sparc
Version: 4.1-40
Pre-Depends: libc6 (>= 2.1.2)
Size: 115856
Description: utilities for finding files--find, xargs, and locate
 These utilities find files meeting specified criteria and perform
 various actions on the files which are found.

Package: shellutils
Essential: yes
Priority: required
Section: base
Installed-Size: 1760
Maintainer: Michael Stone <mstone@debian.org>
Architecture: sparc
Version: 2.0-7
Replaces: bsdutils (<= 3.0-2), util-linux (<< 2.9e-0.1)
Pre-Depends: libc6 (>= 2.1.2), login (>= 19990827-1)
Size: 457642
Description: The GNU shell programming utilities.
 The utilities: basename chroot date dirname echo env expr factor false groups
 hostid id logname nice nohup pathchk pinky printenv printf pwd seq sleep stty
 tee test true tty uname users who whoami yes.

Package: ae
Installed-Size: 82
Maintainer: Dale Scheetz <dwarf@polaris.net>
Architecture: sparc
Version: 962-26
Depends: libc6 (>= 2.0.105), slang1 (>> 1.2.2-0)
Size: 39330
Description: Anthony's Editor -- a tiny full-screen editor
 ae is a tiny full-screen text editor with both modal (vi-like)
 and modeless (emacs-like) modes, determined by an ae.rc config file.
 .
 Keybindings are configurable in the configuration file. The default config
 file is /etc/ae.rc, but another configuration file is provided
 in /etc/ae/*.rc, as an alternate example.

Package: slang1
Priority: required
Section: base
Installed-Size: 416
Maintainer: Jim Mintha <jmintha@debian.org>
Architecture: sparc
Source: slang
Version: 1.3.9-1
Depends: libc6 (>= 2.0.105)
Size: 182010
Description: The S-Lang programming library - runtime version.
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.

Package: tasksel
Priority: optional
Section: base
Installed-Size: 196
Maintainer: Randolph Chung <tausq@debian.org>
Architecture: sparc
Version: 1.0-10
Depends: libc6 (>= 2.1.2), slang1 (>> 1.3.0-0)
Size: 25954
Description: New task packages selector
 Interface for selecting task packages; used for boot-floppies, but can also
 be called independently

Package: libpam-runtime
Priority: required
Section: base
Installed-Size: 132
Maintainer: Ben Collins <bcollins@debian.org>
Architecture: sparc
Source: pam
Version: 0.72-9
Replaces: libpam0g-util
Conflicts: libpam0g-util, libpam0g (<< 0.66-0)
Size: 39734
Description: Runtime support for the PAM library
 Contains the base setup for libpam

Package: locales
Priority: standard
Section: admin
Installed-Size: 10240
Maintainer: Ben Collins <bcollins@debian.org>
Architecture: sparc
Source: glibc
Version: 2.1.3-13
Replaces: localebin, wg15-locale, libc6-bin
Depends: libc6 (= 2.1.3-13)
Conflicts: localebin, wg15-locale
Size: 2052308
Description: GNU C Library: National Language (locale) data [binary]
 Machine-readable data files, shared objects and programs used by the
 C library for localization (l10n) and internationalization (i18n) support.

Package: whiptail
Priority: required
Section: base
Installed-Size: 80
Maintainer: Enrique Zanardi <ezanard@debian.org>
Architecture: sparc
Source: newt
Version: 0.50-7
Replaces: newt0.10, newt0.21 (<< 0.21-4)
Depends: libc6 (>= 2.1.2), libnewt0, libpopt0, slang1 (>> 1.3.0-0)
Size: 17286
Description: Displays user-friendly dialog boxes from shell scripts.
 whiptail is a "dialog" replacement using newt instead of ncurses. It
 provides a method of displaying several different types of dialog boxes
 from shell scripts. This allows a developer of a script to interact with
 the user in a much friendlier manner.

Package: grep
Essential: yes
Priority: required
Section: base
Installed-Size: 732
Maintainer: Wichert Akkerman <wakkerma@debian.org>
Architecture: sparc
Version: 2.4.2-1
Provides: rgrep
Pre-Depends: libc6 (>= 2.1.2)
Conflicts: rgrep
Size: 206016
Description: GNU grep, egrep and fgrep.
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)

Package: mount
Essential: yes
Priority: required
Section: base
Installed-Size: 276
Maintainer: Vincent Renardias <vincent@debian.org>
Architecture: sparc
Source: util-linux
Version: 2.10f-5.1
Pre-Depends: libc6 (>= 2.1.2)
Size: 102554
Description: Tools for mounting and manipulating filesystems.
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.

Package: e2fsprogs
Essential: yes
Priority: required
Section: base
Installed-Size: 640
Maintainer: Yann Dirson <dirson@debian.org>
Architecture: sparc
Version: 1.18-3
Replaces: e2fslibsg, ss2g, comerr2g
Provides: libcomerr2, libss2, libext2fs2, libe2p2, libuuid1, e2fslibsg
Pre-Depends: libc6 (>= 2.1.2)
Conflicts: e2fslibsg, dump (<< 0.4b4-4), quota (<< 1.55-8.1)
Size: 205342
Description: The EXT2 file system utilities and libraries.
 EXT2 stands for "Extended Filesystem", version 2. It's the main
 filesystem type used for hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining EXT2
 filesystems, and the generic `fsck' wrapper.

Package: modutils
Installed-Size: 616
Maintainer: Wichert Akkerman <wakkerma@debian.org>
Architecture: sparc
Version: 2.3.11-13.1
Replaces: modules, manpages (<= 1.15-3)
Provides: modules
Depends: libc6 (>= 2.1.2), sysvinit (>= 2.71-2)
Suggests: ksymoops
Size: 193484
Description: Linux module utilities.
 These utilities are intended to make a Linux modular kernel
 manageable for all users, administrators and distribution
 maintainers.

Package: sysvinit
Essential: yes
Installed-Size: 472
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Architecture: sparc
Version: 2.78-4
Replaces: last, bsdutils (<= 2.0-2)
Depends: dpkg (>= 1.4.0.21), mount (>= 2.7i-1), util-linux (>= 2.9t-2), e2fsprogs (>= 1.15-1)
Pre-Depends: libc6 (>= 2.1.2)
Conflicts: last, file-rc (<= 0.4.2), kbd (<< 0.95-2), mdutils (<< 0.35-9)
Size: 91194
Description: System-V like init.
 Init is the first program to run after your system is booted, and
 continues to run as process number 1 until your system halts. Init's
 job is to start other programs that are essential to the operation of
 your system. All processes are descended from init. For more information,
 see the manual page init(8).

Package: tcpd
Priority: standard
Section: base
Installed-Size: 160
Maintainer: Anthony Towns <ajt@debian.org>
Architecture: sparc
Source: tcp-wrappers
Version: 7.6-4
Depends: libc6 (>= 2.1.2), libwrap0 (>= 7.6-1.1)
Conflicts: netbase (<< 3.16-1)
Size: 37848
Description: Wietse Venema's TCP wrapper utilities
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests. Security options are:
 access control per host, domain and/or service; detection of
 host name spoofing or host address spoofing; booby traps to
 implement an early-warning system.

Package: perl-base
Essential: yes
Installed-Size: 10
Maintainer: Darren Stalder <torin@daft.com>
Architecture: all
Version: 5.004.05-1.1
Pre-Depends: perl5-base
Size: 1682
Description: Fake package assuring that one of the -base package is installed
 This package predepends on perl5-base that is provided by
 the various perl-...-base package. It's essential.

Package: fdutils
Priority: optional
Section: utils
Installed-Size: 691
Maintainer: Vaidhyanathan G Mayilrangam <vaidhy@debian.org>
Architecture: sparc
Version: 5.3-3
Replaces: miscutils, manpages (<< 1.11-3)
Depends: libc6 (>= 2.0.105), makedev (>= 1.6-28), debianutils (>= 1.7)
Recommends: mtools (>= 3.8-1)
Size: 343008
Description: Linux floppy utilities
 This package contains utilities for configuring and debugging the Linux
 floppy driver, for formatting extra capacity disks (up to 1992K on a high
 density disk), for sending raw commands to the floppy controller, for
 automatic floppy disk mounting and unmounting, etc.
 .
  Author: alain@linux.lu
  Released-date: 1999-07-03
  Keywords: floppy 2m xdf superformat floppycontrol fdrawcmd
  URL: http://www.tux.org/pub/knaff/fdutils/

Package: elvis-tiny
Installed-Size: 152
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Architecture: sparc
Version: 1.4-10
Pre-Depends: libc6 (>= 2.1.2), libncurses5
Size: 45638
Description: Tiny vi compatible editor for the base system.
 Elvis-tiny is based on a 1991 Minix version of elvis. You should install
 another vi-editor (such as "elvis", "nvi" or "vim") if you want a full
 featured vi editor.

Package: hostname
Essential: yes
Priority: required
Section: base
Installed-Size: 51
Maintainer: Adam Heath <doogie@debian.org>
Architecture: sparc
Version: 2.07
Pre-Depends: libc6 (>= 2.0.105)
Size: 11424
Description: A utility to set/show the host name or domain name
 The hostname command can be used to either set or display
 the current host or domain name of the system. This name is
 used by many of the networking programs to identify the machine.
 The domain name is also used by NIS/YP.

Package: login
Essential: yes
Priority: required
Section: base
Installed-Size: 360
Maintainer: Ben Collins <bcollins@debian.org>
Architecture: sparc
Source: shadow
Version: 19990827-20
Replaces: shadow-login, shadow-passwd, shellutils (<< 2.0-2)
Depends: libpam-modules (>= 0.72-5)
Pre-Depends: libc6 (>= 2.1.2), libpam0g
Conflicts: shadow-login, pam-apps, secure-su
Size: 122362
Description: System login tools
 These tools are required to be able to login and use your system. The
 login program invokes you user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
 .
 Also supplies a logout daemon that can place limits on when, from where,
 and for how long certain users can login to the system.

Package: libnewt0
Priority: required
Section: base
Installed-Size: 112
Maintainer: Enrique Zanardi <ezanard@debian.org>
Architecture: sparc
Source: newt
Version: 0.50-7
Depends: libc6 (>= 2.1.2), slang1 (>> 1.3.0-0)
Size: 29988
Description: Not Erik's Windowing Toolkit - text mode windowing with slang
 Newt is a windowing toolkit for text mode built from the slang library.
 It allows color text mode applications to easily use stackable windows,
 push buttons, check boxes, radio buttons, lists, entry fields, labels,
 and displayable text. Scrollbars are supported, and forms may be nested
 to provide extra functionality. This package contains the shared library
 for programs that have been built with newt.

Package: fileutils
Essential: yes
Priority: required
Section: base
Installed-Size: 1824
Maintainer: Michael Stone <mstone@debian.org>
Architecture: sparc
Version: 4.0l-8
Replaces: color-ls, util-linux (<= 2.7.1-1)
Pre-Depends: libc6 (>= 2.1.2)
Conflicts: color-ls
Size: 604418
Description: GNU file management utilities.
 The utilities: chgrp chmod chown cp dd df dir dircolors du install ln
 ls mkdir mkfifo mknod mv rm rmdir touch vdir sync.

Package: console-data
Priority: required
Section: utils
Installed-Size: 2920
Maintainer: Yann Dirson <dirson@debian.org>
Architecture: all
Version: 1999.08.29-11.2
Replaces: console-tools-data
Provides: console-tools-data
Recommends: console-tools (>= 1999.04.01) | kbd (>= 0.99-1)
Suggests: debconf (>= 0.2.8)
Conflicts: kbd (<= 0.96a-1), kbd-data, console-tools-data
Size: 822006
Description: Keymaps, fonts, charset maps, fallback tables for console-tools
 This package contains the standard data files for the Linux Console Tools.
 .
 This includes keyboard definitions (keymaps), console fonts for various
 encodings, maps defining the standard charsets for use by text applications,
 and fallback tables allowing to approximate an unavailable character's glyph
 with the glyph of another character in the current font.

Package: libncurses5
Priority: required
Section: base
Installed-Size: 488
Maintainer: Joel Klecker <ncurses-maint@debian.org>
Architecture: sparc
Source: ncurses
Version: 5.0-6.0potato1
Depends: libc6 (>= 2.1.2), ncurses-base
Size: 212390
Description: Shared libraries for terminal handling
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.

Package: libdb2
Priority: important
Section: libs
Installed-Size: 392
Maintainer: Fabrizio Polacco <fpolacco@debian.org>
Architecture: sparc
Source: db
Version: 2:2.4.14-2.7.7.1.c
Replaces: libdb2.6, lib-bdb2
Depends: libc6 (>= 2.1.2)
Conflicts: lib-bdb2
Size: 148884
Description: The Berkeley database routines (run-time files).
 libdb2 is a library for manipulating database files, developed at
 Berkeley and extended by Sleepycat Software Inc.
 This is the stable version, also commercially supported.
 .
 It supports three kinds of file formats:
  * btree. A representation of a sorted, balanced tree structure.
  * hashed. An extensible, dynamic hashing scheme.
  * UNIX file oriented. A byte stream file with fixed or variable
    length records.
 Other core database services:
  * page cache management for fast access, clean page allocation.
  * lock with multiple reader/writer granularity.
  * nested transaction support with logging and rollback recovery
    (two phase commit).
  * Large set of utility, to dump/load/restore data and examine log.

Package: mawk
Priority: required
Section: base
Installed-Size: 232
Maintainer: James Troup <awkmaint@nocrew.org>
Architecture: sparc
Version: 1.3.3-5
Provides: awk
Pre-Depends: libc6 (>= 2.1.2)
Size: 78748
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the Posix 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: netbase
Priority: standard
Section: net
Installed-Size: 1708
Maintainer: Anthony Towns <ajt@debian.org>
Architecture: sparc
Version: 3.18-4
Replaces: netstd (<< 3.00)
Depends: tcpd, libc6 (>= 2.1.2), libwrap0
Suggests: cpp, debconf
Conflicts: xinetd (<= 2.2.1-8), debconf (<< 0.2.34), libwrap0 (= 7.6-3), libwrap0 (= 7.6-2)
Size: 606398
Description: Basic TCP/IP networking binaries
 In order to make use of the network you need a few tools to
 configure it. This package contains all the necessary tools
 to configure the networking interfaces, to setup the routing
 tables and to start other services using the inetd server.

Package: libreadline4
Priority: required
Section: base
Installed-Size: 284
Maintainer: Matthias Klose <doko@debian.org>
Architecture: sparc
Source: readline4
Version: 4.1-1
Depends: libc6 (>= 2.1.2), libncurses5
Size: 101082
Description: GNU readline and history libraries, run-time libraries.
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: silo
Priority: important
Section: base
Installed-Size: 280
Maintainer: Davide Barbieri <paci@prosa.it>
Architecture: sparc
Version: 0.9.8-1
Depends: libc6 (>= 2.1.2)
Size: 136188
Description: Sparc Improved Boot Loader
 Like LILO or MILO, but for SPARC.
 This is the program you need to use if you plan to boot SPARC/Linux
 via a hard drive.  It installs to the boot block of your system and
 will allow for booting of Linux, Solaris, and SunOS.

Package: libstdc++2.10
Priority: required
Section: base
Installed-Size: 384
Maintainer: Debian GCC maintainers <gcc@packages.debian.org>
Architecture: sparc
Source: gcc (2.95.2-13)
Version: 1:2.95.2-13
Depends: libc6 (>= 2.1.2)
Size: 141990
Description: The GNU stdc++ library
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.

Package: diff
Essential: yes
Priority: required
Section: base
Installed-Size: 300
Maintainer: Santiago Vila <sanvila@ctv.es>
Architecture: sparc
Version: 2.7-21
Pre-Depends: libc6 (>= 2.1.2)
Size: 138046
Description: File comparison utilities
 The diff package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.

Package: bash
Essential: yes
Priority: required
Section: base
Installed-Size: 764
Maintainer: Matthias Klose <doko@debian.org>
Architecture: sparc
Version: 2.03-6
Depends: base-files (>= 2.1.12)
Pre-Depends: libc6 (>= 2.1.2), libncurses5
Size: 361168
Description: The GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE Posix Shell and Tools specification (IEEE Working Group 1003.2).

Package: debianutils
Essential: yes
Priority: required
Section: base
Installed-Size: 192
Maintainer: Guy Maor <maor@debian.org>
Architecture: sparc
Version: 1.13.3
Replaces: miscutils, cron (<= 3.0pl1-31), debian-utils, tetex-bin (<< 1.0.6-1.1)
Pre-Depends: libc6 (>= 2.1.2)
Conflicts: debian-utils
Size: 32984
Description: Miscellaneous utilities specific to Debian.
 Debianutils includes installkernel mkboot mktemp readlink run-parts savelog
 sensible-editor sensible-pager tempfile which.

Package: sysklogd
Installed-Size: 228
Maintainer: Martin Schulze <joey@debian.org>
Architecture: sparc
Version: 1.3-33.1
Replaces: syslogd
Provides: syslogd
Depends: libc6 (>= 2.1.2)
Conflicts: syslogd
Size: 71002
Description: Kernel and system logging daemons
 This package implements two system log daemons.  The syslogd daemon is
 an enhanced version of the standard Berkeley utility program.  This
 daemon is responsible for providing logging of messages received from
 programs and facilities on the local host as well as from remote
 hosts.
 .
 The klogd daemon listens to kernel message sources and is responsible
 for prioritizing and processing operating system messages.  The klogd
 daemon can run as a client of syslogd or optionally as a standalone
 program.  Klogd can now be used to decode EIP addresses if it can
 determine a System.map file.

Package: libgdbmg1
Priority: standard
Section: base
Installed-Size: 42
Maintainer: James Troup <james@nocrew.org>
Architecture: sparc
Source: gdbm
Version: 1.7.3-26.2
Provides: elf-libgdbm
Depends: libc6 (>= 2.0.105), libc6 (>= 2.0.99)
Conflicts: libgdbm1 (<< 1.7.3-20)
Size: 18442
Description: GNU dbm database routines (runtime version). [libc6 version]
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).

Package: libpopt0
Priority: important
Section: libs
Installed-Size: 92
Maintainer: Joseph Carter <knghtbrd@debian.org>
Architecture: sparc
Source: popt
Version: 1.4-1.1
Replaces: popt
Depends: libc6 (>= 2.1.2)
Conflicts: popt, libpopt-dev (<= 1.4-1)
Size: 14330
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.

